For any type of air conditioning system in Pittsburgh, the cooling capacity is measured in BTU’s. This is important to know if the system doesn’t seem to be adequately cooking your home, and there are many different ways to check the cooling capacity of your AC system.
1. Air Conditioning System’s Age and Serial Numbers
An air conditioner’s age will usually give you a general idea for its cooling capacity, and if you aren’t sure, you can always check the serial number. Because serial number formats vary by the year the equipment was made, you can check to see how old an air conditioner is from looking at the serial number.
The first four digits of every serial number is the week and year the unit was manufactured. For example, the serial# 1188E53294 on a compressor unit tells us that it was made between 1980 and 1990, and to be more exact, week 11 in 1988.
2. Air Conditioner’s Model Number
You should also look at the model number for your specific model because some manufacturers also vary how they assign each number in the serial number; however, they usually stand for tonnage or MBTUH. You can always call us if you aren’t sure how to read the serial number or model number.
3. AC Equipment’s RLA Numbers
RLA stands for “Rated Load Amps,” which means that it’s the manufacturer’s rate of the cooling capacity (also known as the draw) or load while it’s operating (minus the draw when you start the system). Most air conditioning compressor or condenser units will draw 5 to 6 RLA per ton of cooling capacity. You can check the data tag on the compressor for the RLA rating; however, this will need to be translated into BTUH for the total cooling capacity.
Feel free to call one of the Pittsburgh air conditioning experts at Boehmer Heating & Cooling Company if you have any questions how to calculate your AC system’s cooling capacity.