Boehmer Heating & Cooling Blog: Archive for the ‘Energy Savings’ Category

Home Energy Myths: A Tip From Cranberry

Monday, September 12th, 2011

Measuring and controlling your Cranberry home’s energy consumption is a little tricky. There are plenty of talking heads and information resources on the Internet that tell you how it’s supposed to work, but in most cases you’ll find that so called common knowledge about your home’s energy use isn’t always true. Here are some of the most common myths and how to differentiate from the truth.

  1. Conservation and Efficiency Are Different – Many people think that by getting an energy efficient appliance, like an Energy Star air conditioner, they are conserving energy and helping the environment. To some degree this is true. However, in reality, you are merely reducing how much energy it takes to complete a task. Conservation is finding ways to actually stop using energy for common tasks. Taking baths instead of showers, not watering your lawn, and turning off lights completely are all examples of conservation.
  2. Turning Off an Appliance Saves a Lot of Energy – Regardless of whether an appliance is physically on or not, it still consumes power as long as it is plugged in. The only way to completely stop your energy consumption is to unplug an item completely or use a power strip that blocks access to electricity when the switch is turned to off.
  3. Turning on Items Creates a Power Surge – While turning a computer on and off uses a bit more electricity than simply leaving it on all the time, it isn’t a significant difference. In fact, the longer you leave an appliance on, the more it wears down and the faster it starts to use extra power to remain effective.
  4. One Energy Source is Cheaper than Another – This depends largely on the type of energy source you have for heating and cooling, the cost of that source and how much heating and cooling you need. A single portable electric heater is cheaper than running your entire oil heating system. But, electric heaters are rarely cheaper if you use them to heat your entire home.

Myths abound when it comes to energy use around your home. But there are some easy ways to conserve energy and if you need more information, contact your local HVAC professional.

Continue Reading

What Is the Single Biggest Money-Saver Upgrade You Can Make?

Friday, July 15th, 2011

While it would be great if there was a simple answer to this question, the real right answer depends to a great extent on your own particular situation. There are literally dozens of steps you can take to save on your home heating and cooling costs, and which ones are most appropriate for you will have a lot to do with what you already have, how you use it and where you live.

For instance, if you have a well-insulated house but your HVAC system is more than 10 or 15 years old, investing in a new system will almost certainly save you a ton in the long run. Even if your existing system is working well, the newer systems available are simply so much more energy efficient that having one will cut your monthly bills dramatically.

Plus, you will be replacing your system relatively soon anyway if it is that old, so you might as well start saving now on your heating and cooling costs. However, even the best heating and cooling system on the market will not save you that much money if you do not have a properly insulated and sealed house.

Insulation keeps the warm air in during the winter, and it also keeps colder air from seeping in. In the summer, it works the other way around, keeping in the air you are paying to cool and keeping out the hotter outside air. If you do not have thorough insulation or if it is too old, that temperature controlled air that you are paying for will be leaking out and unwanted outdoor air will be finding its way in. You will pay much more than necessary to keep the indoor temperature comfortable as a result.

If you have both good insulation and an energy efficient HVAC system, your thermostat might be the place to look when you want to try and cut your energy costs. A programmable or wireless thermostat might be just the ticket you need to cut back even more on your energy bills because of the added control it gives you to more precisely regulate the temperature inside your home.

Particularly if you have a large house, you might even consider having a zone control system put in so that you can set different temperatures for different areas of the house. After all, there is no need to be paying to regulate the temperature in a part of the house that is unoccupied.

Continue Reading

Save with Insulation

Friday, July 8th, 2011

When you are looking for ways to save money around the house, it can be difficult to know where to begin. However, if you start examining things closely, you can actually find many small ways to cut here and there to save a few dollars. Of course, the savings you will generate by making these moves need to be worth the expense of making them, and it some cases that equation does not work out to your advantage.

For instance, when you are trying to save money on your heating or air conditioning bills, is it really worth it to get a top of the line system installed? Do you really need a 97% AFUE furnace? Sure your monthly heating bills will be lower, but it costs so much to install that it might not be worth it. For some people, the right choice will be to opt for the highest efficiency system, but that is far from a universal truth.

However, there is one investment along these lines that will be worth it no matter what your particular situation is. And that is making sure that your house has proper and effective insulation installed everywhere necessary. Certainly, most houses have insulation of some kind. But do you really know that your insulation is effective and that it is in the right place?

With the new technologies and types of insulation available, you should not have to pay too much to have someone come in to check your insulation and improve upon it. And you very likely will not believe the difference it can make in the way your house feels.

Proper insulation will keep heat in and cold out in the winter and the opposite in the summer. You will quite simply be more comfortable all year round. Plus, you will see a pretty dramatic drop in your home heating and cooling bills because your HVAC systems will not have to work as hard to keep your home comfortable.

This will also translate into less wear and tear on the system over all, making it possible for you to extend the useful life of your HVAC system as well. The savings that can be generated by having proper insulation put in will well outweigh the cost of that insulation in just about every case.

Continue Reading

Save Money with Coupons

Wednesday, July 6th, 2011

HVAC and plumbing services are not things that you usually think about using coupons for. After all, you almost never call an HVAC specialist or plumber unless there is an emergency, and that means you probably do not have time to go hunting for a coupon. You are going to go with the person who is able to respond quickly and get the job done fast.

But that does not mean you should have to pay too much for emergency or other HVAC and plumbing services. In fact, if you know where to look, you can find coupons for great deals on anything from annual maintenance to full new system installation. Of course, not all of these deals are that great. But even saving a little on each service will add up over time. Plus, gathering up some coupons ahead of time will make it easier for you to choose a good HVAC service or plumber because you can see which one in your area offers the best deals.

So where do you find these great coupons? Well, a lot of them can actually be tracked down online. A simple search for HVAC or plumbing coupons in your area should turn up quite a few results for services you could use now or in the future. Some of these offer quite substantial savings as well, so even if they are for something you do not need at the moment, take a look at the expiration date. Even if you are not sure you will be able to use the coupon in that space of time, there is certainly no harm in holding onto it just in case.

It is also important to remember that you do not need to stay with the same company that installed your system, for instance, if you can find a coupon for great savings on annual maintenance with someone else. Just about every company in this field is well versed in handling all types of HVAC or plumbing equipment and they can easily take care of a system that another company installed.

Particularly if you are not satisfied with the service that you get from the company you are now using, look around for coupons from someone else. That is a great way to figure out which new company is worth a try.

Continue Reading

Maintenance Really Does Save Money

Monday, July 4th, 2011

When it comes to your home heating and cooling systems, you really cannot go wrong with proper annual maintenance. While it may seem like an unnecessary expense, especially if your systems are relatively new, you will save a lot in the long run if you pay that small fee once a year for each system.

During a maintenance visit, a technician can thoroughly clean out your heating or cooling system and check all parts to make sure they are not showing signs of excessive wear and tear. If they do find a problem or a part that needs to be replaced, they will be able to make the necessary repairs quickly and you will not have to worry about calling someone out later for an emergency visit.

Also, catching problems early like this means that repairs will likely involve fewer parts and cost much less than they would if you let the problem go and it became more widespread. The truth is that your heating or cooling system can continue to work when one or another of its parts is not working correctly, but that means that other parts of the system have to work overtime to create the same result.

Your heating or cooling system will also be much more energy efficient if it receives regular tune ups and attention from a professional. Even the best new systems lose a small percentage of their efficiency each year that they are in operation. While this is not much from year to year, the cumulative effect will soon cause your energy bills to climb higher than necessary.

Paying for regular maintenance, then, can actually save you money because it will mean you pay less each month to run your system. And it is never too late to start. Even if your heating or cooling system is not new, it will benefit from a thorough cleaning and tune up. You may be quite surprised how much your energy bills go down after this type of service has been performed.

Annual maintenance can also help you to get more for your money by extending the useful life of the heating or cooling system. Many systems that are properly maintained can last even beyond their expected life span, meaning that you will not have to replace it as soon as you would have otherwise. For all of these reasons, the minimal cost of an annual maintenance visit is well worth paying over the long term.

Continue Reading

What Do the Energy Stars Indicate?

Friday, July 1st, 2011

If you’re in the market for any type of appliance for your home, you’ve probably come across some that boast an Energy Star certification. But what does this really mean? After all, there are all types of special labels that manufacturers put on their products to make them look better, so how can you know which ones are really worth paying attention to?

Why Energy Star Matters

The truth is that no matter what type of appliance you’re looking for, from a coffee maker to a new furnace, buying one with the Energy Star label is definitely a good investment. This certification is conferred by the Environmental Protection Agency (EPA) and it can only be used on products that pass the EPA’s stringent tests for energy efficiency and environmental impact.

Energy Star products create fewer pollutants like greenhouse gasses because they use less energy to get the job done than their inefficient counterparts. This is great for our planet, but it also translates to savings for you as a consumer. Because Energy Star appliances use less energy to heat or cool your home or do whatever else you need them to do, your monthly bills will be significantly reduced.

Quality and Performance Measured

And you don’t have to worry about inferior performance as a result of increased energy efficiency either. Energy Star products can only receive the label if they provide all of the features you’ve come to expect from comparable products across the board. They need to maintain high energy efficiency ratings while still maintaining a superior level of performance.

While it’s true that you may wind up paying a bit more for an Energy Star product, that is only a one-time cost. If you compare the monthly savings you’ll receive by using your Energy Star appliance on a regular basis to what you would pay out over time with a less efficient model, it’s easy to see how the Energy Star product costs you less.

For all of these reasons, the Energy Star rating is definitely worth looking out for when shopping for home appliances and equipment. These products are made to be reliably energy efficient and can save you a ton over the years as long as they’re properly cared for.

Continue Reading

I Have a Room that Won’t Stay Warm or Cool

Wednesday, June 29th, 2011

When you have a home heating or cooling system installed, you expect it to keep all areas of your home at the same temperature unless you tell it otherwise. But sometimes you’ll find that one of the rooms in your home just won’t stay warm no matter how high you turn up the heat. This can be a very frustrating situation, particularly if that room is one you use a lot.

Insulation and Ductwork Checkups

There are actually several possible reasons that a problem like this can develop. The first thing you should check is if there is adequate, proper insulation in the walls and the floor of the room. Even if you know that insulation is in place, it’s worth it to have a professional come take a look to see if the insulation there is still adequate. Even the best insulation doesn’t last forever, and once it breaks down, you could be losing a lot of heat to the outdoors in the winter.

If insulation isn’t the problem, it’s time to have someone examine your ductwork to see if it’s properly pressurized throughout or if there could be a break in the system somewhere leading to that room. If your home comfort system pumps heated and cooled air towards that room and that air is allowed to leak out along the way, you’ll never be able to maintain the comfort level you want.

Digging Deeper for Causes

Even if there is no break on the way to that particular room, a leak or blockage somewhere else can throw off the balance of the entire system, reducing how much temperature controlled air can reach that part of your home. These are all things that a professional duct tester can find and fix for you relatively easily and inexpensively.

Of course, it’s always possible that uneven heating and cooling is a symptom of a larger problem in your home heating and cooling system. But if that’s the case, you’re better off finding out sooner rather than later because the problem will only get worse when not addressed. No matter what the ultimate underlying cause for your uneven heating and cooling is, you’ll need a professional to come out and investigate before you can have it fixed for good.

Continue Reading

Noise Control for Your HVAC System

Monday, June 27th, 2011

Most people think of HVAC and associate it directly with comfort. They assume that once they are warm or cool in their home that there is nothing else to worry about, but even the smallest HVAC systems can be quite noisy, and if you own a business or live in a multi-family building, they can be downright disruptive.

Luckily, there are tools available to cut the sound level and make it far more comfortable for everyone both inside and outside the building.

Residential Noise Control

The easiest way to reduce noise in your home is to purchase HVAC equipment designed to run quietly. Today, many manufacturers provide air conditioners and furnaces with dampeners and quiet control devices that reduce the sounds these devices traditionally make. Even the classic banging sound of a boiler is now generally history.

But, even with new technology, most HVAC systems still make some noise, so if you want to cut out the noise completely, there are upgrades you can make. First on the list is a sound blanket. A sound blanket wraps around your compressor and blocks out the steady noise that these devices make. Older compressors especially can benefit from these.

Your ductwork can be noisy as well so duct lagging is a popular upgrade to keep the sound of heated or cooled air passing through your home to a minimum.

Industrial Strength Noise Control

If you live in a larger building or own a business, industrial strength devices are necessary to stop the noise. Blankets and lagging are still effective, but you might also consider mufflers and silencers to block out the exhaust noises that are made by larger units. Vibration isolation helps reduce structural noise and sound barriers wrap around an HVAC unit to contain residual noise to a certain area.

Overall, there are quite a few ways to make sure you stay comfortable and blissfully unaware of the operation of your system throughout the year. The key is to make sure you target whatever noise source is most prevalent in your particular HVAC system. Some systems suffer from vibrations while others have noisy compressors. Find the culprit and stop the sound in its tracks with the right noise controller.

Continue Reading

What to Look for when a Home is 100 Years Old

Monday, June 20th, 2011

Many people like older homes, but at a certain point, the age of a home can be a bit of a turnoff. It’s not the architecture – old homes are magnificently built and tend to have more character in the woodwork and nooks and crannies than any new home. But, when you move beyond how impressive early 20th century (or earlier) architecture is, you might find a number of maintenance and upkeep issues that have only been made worse by the passage of time.

Common Problems to Watch For

As with a 50 year old home, materials are a big issue. You need to have your home tested for lead paint and asbestos – both things that can be incredibly dangerous for every resident, especially children. These are very likely to be a part of the home if it hasn’t been remodeled in the last 30 years. Retrofitting to cover them up or remove them will be an added expense.

Additionally, older homes have much greater ratios of ventilation. If insulation has not been added in the last 25 years to cover those vents and gaps, your home will be very drafty, which is uncomfortable in the winter and costly year round. Make sure to have your home pressure tested and sealed up as soon as possible.

Upgrades You Can Make

Electricity is another major issue in older homes. While most old homes have been owned multiple times and likely upgraded since they were built, occasionally you will run across a house with extremely old wiring. That might mean a low capacity panel box or single strand wiring. Either way, it’s unsafe and unstable – for modern appliances and electronics you’ll need to upgrade that wiring as soon as possible.

The same may be true for your plumbing. If the house has original plumbing and fixtures, not only will they be inefficient, they may be rusty or prone to leakage. Sewer lines in particular are expensive replacements if they decide to break. Make sure you have these thoroughly inspected before a purchase.

The Joy of an Older Home

Despite all of the potential problems an old home might offer, there are plenty of benefits. Established neighborhoods, solid construction, and the ability to alter your home however you want are all positives you can’t overlook when buying a home. Just make sure you’re fully aware of what you’re getting into. Even a well maintained old home may have some issues that you miss on your initial walkthrough – make sure your inspector is thorough.

Continue Reading

What Is LEED Certified?

Friday, May 20th, 2011

If you’ve been looking into purchasing a home or having any type of major construction done, you may have run across the term LEED Certified. Of course, contractors boast of so many certifications these days that it can be tough to tell which you should pay attention to and which you shouldn’t. But the LEED certification is definitely one that’s worth taking into account when you’re choosing a contractor and planning out your project.

The Benefits of LEED Certification

LEED stands for Leadership in Energy and Environmental Design. The standards and guidelines for obtaining LEED certification were put together by the U.S. Green Building Counsel in order to improve construction practices and help buyers find property that meets higher standards in a variety of environmentally significant categories.

For instance, a LEED certified home boasts better water and energy efficiency than the average home that is not LEED certified. It also was put together using techniques designed to reduce carbon dioxide emissions and improve indoor air quality, making it both the healthy choice for you as the consumer and the environmentally responsible one.

When you purchase a LEED certified home, you’re not just helping the environment either. You’re also helping yourself in a variety of ways. That’s because a home that meets LEED certification standards for energy and water efficiency will help you generate smaller energy and water bills each month. That translates to huge saving over time, so even if you pay a bit more initially for your home, you’ll get that money back many times over as time passes.

LEED certification isn’t just something you should pay attention to when you’re buying a new home. Any construction project you undertake for your existing home can also benefit from these guidelines and standards. For that reason, it’s worth seeking out a contractor who can provide services in line with LEED standards. These types of improvements and techniques need to be incorporated in your home improvement project from the initial planning stage, and a contractor familiar with LEED standards will have no trouble doing just that.

You can also have confidence in the contractor you pick if they carry LEED credentials because they’re not easy to get. Anyone who is LEED certified has put a lot of time and energy into obtaining those credentials and is likely just the type of contractor you’d like taking care of your next home improvement project.

Continue Reading