Air filters are important pieces in your overall Oakmont home’s comfort system. They keep unwanted debris and sediment out of your indoor air and they help your system run smoothly for years to come. However, if you’re not careful, an air filter put in backwards can lead to quite a few problems with your heating and cooling system.
The Most Common Problems
The most common problem you will face with a backwards facing filter is simple inefficiency. If your furnace is forced to blow air through the non-porous end of a filter, it will take more energy to do so. The blower will be overworked and you will pay more money for your heating. The same is doubly true for an air conditioner which has multiple filters in place to keep outdoor contaminants out of your indoor air.
Beyond the cost of improper filtering, you will likely suffer from a decrease in indoor air quality. The filter is designed to remove a lot of unwanted debris, but only when installed in a certain direction. If you set your filter up backwards, the normally collective end of the device will not face the air supply. In effect, your filter will help keep debris in the air.
This results in a clogged filter and improperly cleaned air when it reaches your lungs. If you have a home indoor air quality system it will help to supplement this problem for a while, but the clog will eventually become too much for your system.
Avoiding the Problem
There are two ways to avoid improper installation. First, you can have a professional install the system for you. Whenever you need a new filter ask someone to come and take care of it. When they do, though, pay close attention to how they set the filter and any other steps they take. By carefully watching you can ideally learn what it takes to do this step yourself and hopefully keep your system running smoothly for years to come.