Boehmer Heating & Cooling Blog: Posts Tagged ‘Pittsburgh’

Pittsburgh Air Conditioning Tip: What to Do About Cool Spots

Monday, June 4th, 2012

Sitting on your couch watching TV should be an enjoyable experience, especially after a long day at the office. But, if your Pittsburgh air conditioner deposits an abnormally high volume of cold air directly onto your couch, making you shiver despite the 90 degree heat outside, you may have a cool spot.

Cool spots are an unfortunate side effect of modern air conditioning technology. They occur when HVAC systems are improperly sized or ductwork is improperly installed. Other factors like insulation, vent configuration or window placement can also contribute to the presence of a cool spot (and possibly some hot spots). So, what can you do about it? There are a few options, starting with a quick inspection of the space.

Checking for Common Problems

Your inspector will check a number of things. Most importantly, they’ll measure the size of your HVAC system and compare it to the dimensions and particulars of your house. Usually, in the case of cool spots, the problem is directly related to an oversized system. When it turns on, even for a few minutes, it produces more cold air than is necessary, flooding your home with cooling. The thermostat recognizes this and the system shuts off soon after turning on. As a result, you’ll feel fluctuation between cold and warm as the system fails to properly condition the space.

Modern systems are sized for your house at 100% capacity. So, when the system turns on, it should stay on for a substantial period of time, keeping your home cool. Turning off and on frequently is bad for the system and wastes energy (plus it produces those pesky cool spots). Keep in mind that hot spots can also occur if the system isn’t powerful enough.

Your inspector will also look for vent placement and duct configuration. Improper placement of vents can lead to pooling of cool air that creates cool spots. By checking for potential problems in the layout of your Pittsburgh  HVAC system, an inspector can determine if new vents or ducts are needed to solve the problem.

Fixing the Cool Spots

For now, you may just want to move to another part of the house. Cool spots rarely affect the entire space – they tend to cluster around vents and outlets and can usually be fixed by resizing or adjusting your system. However, only your Pittsburgh air conditioning contractor can tell you for sure what the best solution will be for your air conditioning issues so make sure to schedule an inspection.

Call Boehmer Heating & Cooling today if you are concerned about cool spots in your home!

Continue Reading

Tags: , , , , ,
Posted in Air Conditioning | Comments Off on Pittsburgh Air Conditioning Tip: What to Do About Cool Spots

Chose ENERGY STAR For Your Air Conditioning Installation

Friday, June 1st, 2012

Energy Star | Pittsburgh | Boehmer Heating and CoolingLooking to replace your air conditioning system? You should think about buying an ENERGY STAR labeled model. A high efficiency air conditioner can make a huge difference in your energy bills if you are replacing an older model. Central air conditioners need a SEER rating of at least 13 get the ENERGY STAR label, and many older systems have a SEER that is 6 or less! You can get models with a SEER of 20 or higher, so talk to professionals at Boehmer Heating and Cooling to find out what the best AC system for your home is.

Looking for more ways to save with your air conditioning system? Call Boehmer today to learn about zone control, programmable thermostats, and more advice on energy saving practices. Boehmer Heating and Cooling provides services in Pittsburgh, and the Greater Pittsburgh area.

Continue Reading

Tags: , , , , ,
Posted in Air Conditioning, Energy Savings | Comments Off on Chose ENERGY STAR For Your Air Conditioning Installation

Pittsburgh Family Fun

Friday, May 18th, 2012

Looking for some fun family activities in the Pittsburgh area? This weekend is the Pittsburgh International Children’s Festival and the 2012 Venture Outdoors Festival!

Family Fun | Pittsburgh | Boehmer Heating and CoolingPittsburgh International Children’s Festival– Enjoy free hands-on educational and cultural activities and a bevy of additional shows and performances for an extra fee.
Schenley Plaza and University of Pittsburgh Theaters
Wednesday, May 16 through Sunday, May 20, 2011

Venture Outdoors Festival 2012– Climbing, fishing, kayaking, biking, hiking, and much more. Best of all? It is free for the whole family!
Point State Park, Downtown Pittsburgh
Saturday, May 19, 2012

Boehmer Heating and Cooling serves the heating and cooling needs of the Greater Pittsburgh area since 1933. Check out our specials and promotions to get a great deal on your next home comfort purchase.

Continue Reading

Tags: , , , , ,
Posted in Air Conditioning, Heating, Local Event | Comments Off on Pittsburgh Family Fun

Pittsburgh AC Question: What Are Thermostatic Expansion Valves?

Monday, May 14th, 2012

The thermostatic expansion valve, sometimes known as a TEX, TEV or TXV, is a critical piece to influence the efficiency of all air conditioning and refrigeration units, including the AC system in your Pittsburgh home.  A tiny sensor controlling the evaporating phase of process, the valve can have a big effect.

Cool air is manufactured by a re rapid movement of a refrigerant between liquid and gaseous states.  Compound chemicals that are able to do this at a low temperature are compressed and expanded, absorbing and releasing heat at different points along the way.  The TEV controls the flow of the refrigerant into the evaporator coils according to the temperatures of the various ingredients.

Cool Air 101

To condition air, the refrigerant, most often freon or another fast acting, low temp compound, evaporates into a gas that runs through a coil and absorbs heat.  Passing through a compressor, the freon condenses under pressure back into a liquid again and releases the heat, becoming cool enough to chill a party.

Too much freon in the evaporator tube and the pressure is not low enough to expand to gas and absorb heat, working inefficiently for no gain.  Too little freon and the conversion is also ineffective by not reaching the density needed to condense.

There are four types of valves with different benefits for different types of cooling environments.  With its ability to adjust minutely to changing conditions, the thermal expansion valve creates the perfect mixture of pressure and freon for more complicated systems.

At the Starting Gate

An interactive device, the valve senses the evaporator pressure and temperature and adjusts the flow of the refrigerant so as to maintain a given “superheat”, the differ­ence between the refrigerant vapor temperature and its sat­uration temperature.  By controlling superheat, the TEV keeps nearly the entire evaporator surface active while not permit­ting liquid refrigerant to return to the compressor.

Some valves operate on an electrical impulse from sensors that can measure the temperatures.  Others are open all the time.  The thermostatic expansion valve actually utilizes the pressure between the two sections to open or close itself, regulating flow based on the very same pressure it is designed to moderate.

Like the buildings they comfort, large central air conditioning systems in Pittsburgh are varied and diverse.  There are nearly as many thermostatic expansion valves as there are units to receive them.

For more information about how to help your AC work effectively, give Boehmer Heating & Cooling a call!

Continue Reading

Tags: , , , , ,
Posted in Air Conditioning | Comments Off on Pittsburgh AC Question: What Are Thermostatic Expansion Valves?

Pittsburgh AC Repair Question: Why Is My Air Conditioner Not Cooling?

Monday, May 7th, 2012

Designed for one to two decades of life, your Pittsburgh air conditioner is able to run virtually trouble free with just a little maintenance annually.  If these little things like changing the air filter and cleaning the drain are not done regularly, the neglected units can really lose their cooling power.

The Basic Course

Through a process which involves the rapid evaporation and condensation of chemicals called refrigerants, air conditioners use compounds that have properties that allow them to change rapidly from gas to liquid and back again at low temperatures.

Heat is absorbed when the liquid evaporates and transforms into gas, making the space around it cooler.  Compressing it tightly together again, the heated gas condenses back into liquid with a residue of unwanted moisture that must be released and is vented usually to the outdoors.

The newly cooled air is distributed through the house by means of ductworks, pushed by fans driven by electric motors.  As the air moves along, it passes through a filter and can be further de-humidified.

Problems in the System

If the filter is clogged, movement of the cooled air is slowed to the point we might think the unit is broken.  If the condensate drain is plugged, the motor can get damaged and stop producing.  Regular maintenance performed by the home owner or as a service of  Boehmer Heating & Cooling can avoid or eliminate these simple aggravations.

When the heat builds, however, and cool relief seems nowhere near the air ducts, it may be time to call a professional to dig deeper to find the reason and suggest solutions.

Back to Cool

If not serviced regularly, the amount of refrigerant in the coils may decrease over time or the coils themselves could get clogged and impede the evaporation/condensation process.  A leak in the coils could drain the system, rendering the unit useless and wholly unproductive.

There are belts on each of the two separate fan motors which may be worn or loose, causing the fans to blow less efficiently.  The motor may need to be oiled or have a broken part that doesn’t allow it to push the air at all.

Most of the time, these fixes are relatively minor and do not threaten the life of the air conditioning unit.  Schedule an annual inspection and service from a certified Pittsburgh HVAC company like Boehmer Heating & Cooling to take it off your list and stay cool.

Continue Reading

Tags: , , , ,
Posted in Air Conditioning | Comments Off on Pittsburgh AC Repair Question: Why Is My Air Conditioner Not Cooling?

Do you know how to maintain your heat pump?

Friday, April 27th, 2012

Heat Pump Maintenance | Pittsburg | Boehmer Heating and CoolingA heat pump provides a number of benefits over traditional heating and cooling. The versatility of a heat pump means having reliable comfort control every day of the year.  Generally heat pumps are more efficient, however they do still need to have some regular maintenance in order to make sure that they continue to effectively heat or cool your home. The average homeowner can change the filters monthly and make sure that the components are clean, but you will need a professional HVAC technician to perform some of the maintenance tasks. The technician will check things like the air flow and refrigerant charge, as well as inspect the electrical systems.

 

Annual maintenance will not only help you cut down on future repairs, but it will also save money on your utility bills. Check out our maintenance plans to help with your Pittsburgh area heat pump and home comfort system maintenance.

Continue Reading

Tags: , , , , ,
Posted in Air Conditioning, Heat Pump Systems, Heat Pumps, Heating | Comments Off on Do you know how to maintain your heat pump?

Pittsburgh Geothermal Guide: Types of Loop Systems

Monday, April 23rd, 2012

Energy resources are changing rapidly.  The conventional oil, gas and coal fuels are giving way to alternative sources like wind, solar and hydro.  Geothermal energy is less understood by consumers, but potentially the most abundant source available, nearly as huge a supply as the Earth itself. Many people are considering installing geothermal heating and cooling in Pittsburgh.

From the Greek word “geo” for “earth”, geothermal energy is generated by the natural process of heat gravitating toward cooler temperatures.  The by-product can be captured and utilized simply as heat or converted to electricity. In small, self-contained residential or large commercial applications, this typically happens in either closed or open looped systems.

Closed Loop Geothermal Systems

Systems using water or anti-freeze that run from the pump into the ground and back to the pump continuously are closed looped.  Most efficient for smaller residential systems where land is available, two or three horizontal loops are side by side just a few feet underground.  Sometimes the loops are spiraled underground to extend the overall length in a shorter area.

Where the need for length may be prohibitive to run alongside the building, large commercial buildings and schools often use vertical systems.  A series of holes four inches in diameter are drilled about 20 feet apart and 100–400 feet deep and filled with two pipes connected at the bottom to form a loop. Each loop is connected with a horizontal manifold pipe in a trench which connects to the heat pump in the building. Vertical loops are also the choice when the soil is too shallow for trenching.  This system minimizes the disturbance to existing landscaping.

If the site has an adequate water body, a pond/lake loop may be the lowest cost option where a supply line is run underground directly to the water and coiled into circles at least eight feet under the surface to prevent freezing before looping back to the building.

Open Loop Geothermal Systems

An open loop system takes surface water or a well to use as the heat exchange fluid that circulates directly through the GHP system instead of a piped fluid passing through the surface. Once circulated through the system, the water returns to the ground through the well or a discharge over the surface.

Hybrid systems using a combination of a geothermal loop underground and outdoor air (i.e., a cooling tower), are another technology option, particularly effective when cooling needs are significantly higher than heating needs. Where local geology permits, the “standing column well” is a variation of an open-loop system with one or more deep vertical wells drilled.

Whichever loop is used, it is clear the face of energy is changing and geothermal energy is beginning to play an increasing role of supply to meet the new demand.

For more information about getting geothermal heating and cooling installed in your Pittsburgh home, give Boehmer Heating & Cooling  a call today!

Continue Reading

Tags: , , , , , ,
Posted in Geothermal | Comments Off on Pittsburgh Geothermal Guide: Types of Loop Systems

Pittsburgh Air Conditioning Maintenance Tip: When Should You Check Your AC Filters

Monday, April 9th, 2012

The filters on your Pittsburgh air conditioning unit are vital for keeping out the dust and debris that make things like illness, allergies and air quality worse. And it’s important that you take personal responsibility for checking those filters. Sure, you have a Pittsburgh air conditioning professional visit your home once a year to check the air conditioning, but you should also check the system yourself on a semi-regular basis for possible filter degradation.

Monthly Checks

So, how often should you check? Think of it this way. There is no such thing as checking too much, but you can easily not check often enough. So, we recommend checking your filter at least once every 4 weeks. It may not always need to be changed during that four week checkup (sometimes it can last 6 weeks or longer), but it’s good to take a peek.

Why is this so important? Because filters that haven’t been checked and changed as needed have a habit of building up excess sediment and debris. Not a problem when it comes to actually working, but a huge problem when it comes to your energy bill. The harder a system has to work to keep you house cool, the more energy it draws and the more you pay to have cool air in your home. And it will break down much faster as a result of overwork and dirty filters.

Changing an AC Filter

If your filter is ready for a swap, here are some quick tips to get the job done:

  • Find Your Filters – If you don’t know where your filters are, ask your contractor on the next visit or look near the return grills by the thermostat.
  • Remove the Filters – Open the latches and pull the old filter out to check it. You should be able to see clearly through a permanent filter and a disposable one should still be white. If this isn’t the case, it’s time for a cleaning/replacement.
  • Clean the Area – Clear the grill and area of any debris and sediment that might make the filter worse after replacement.

Proper filter maintenance only takes five minutes and it will save you money every month you run your AC – not a bad deal for a few minutes’ work. If you need a complete tune-up for your air conditioner, give Boehmer Heating & Cooling a call today!

Continue Reading

Tags: , , , , ,
Posted in Air Conditioning | Comments Off on Pittsburgh Air Conditioning Maintenance Tip: When Should You Check Your AC Filters

Pittsburgh Heating Tip: How to Check if Your HVAC System Is the Right Size

Monday, March 26th, 2012

Do you ever feel that your Pittsburgh home just doesn’t get cool enough during the warm months or warm enough during the cold months? You have tried to adjust your thermostat to the right comfort level but it just never seems right. And on top of that, you notice that your utility bills keep going up and up. Even when you dial up the thermostat in the summer and dial it down in the winter to saving on energy usage, your bills are still about the same.

You could try adding fans and shedding clothes during the warm months or wearing sweaters and crawling under a pile of blankets in the cold months. But do you really enjoy living that way? There must be another solution as to why your Pittsburgh heating and cooling (HVAC) system is just not keeping you comfortable – and affordable.

That air conditioning condensing unit sitting in your backyard and the furnace in your basement should be making your home as comfortable as possible. But in many cases, they are not.  That’s because whoever installed those HVAC system components didn’t do their homework on your home. The components were sized incorrectly. If a furnace or air conditioner is sized incorrectly, it usually cannot keep up with the demand for heat or cold and often puts such a burden on the equipment. As a result, regular failures and repair bills are commonplace.

And it may not be the fault of the installing Pittsburgh HVAC contractor. Over the years your home may have undergone renovations including additions and new windows, which have increased the square footage or demand for more heating or cooling. Those renovations may not have included upgrades to your home’s HVAC system.

So how do you check for the right size? Call a professional HVAC contractor and ask for evaluation of your home. The audit will include several key checks including a load calculation, which adds in the size of your home’s living space, number of door and windows where heat loss or gain could occur, and a check of heat loss or gain through leakage in cracks, roofs, crawlspaces, etc. An audit will determine what size of furnace or air conditioner is needed to meet the heating or cooling needs of your home and its own individual characteristics. Your HVAC contractor may also factor in the number of building occupants and normal usage patterns, i.e. having a home office or stay-at-home parent versus a working family where your home is occupied mostly at nights or on weekends.

All of these factors are considered when determining the equipment size. In air conditioning jargon, you will hear about tonnage of cooling capacity. An example may be a 2.5 ton air conditioning unit for a 2,000 square foot home. In furnace jargon, you will learn about Btu ratings, which are British thermal units. Most furnaces are sized in 20-25,000 Btu increments. Each is matched to the cooling or heating needs of your home.

Make sure you don’t hire someone who “guesstimates” how much cooling or heating capacity you need for your home. Find a qualified Pittsburgh heating and cooling professional who will make the correct calculations and who will qualify their recommendations.

For any questions about your home’s heating system, please give Boehmer Heating & Cooling a call today!

Continue Reading

Tags: , , , , ,
Posted in Heating | Comments Off on Pittsburgh Heating Tip: How to Check if Your HVAC System Is the Right Size

Things to Try Before Calling a Pittsburgh HVAC Professional

Wednesday, February 29th, 2012

Your Pittsburgh home’s HVAC system can seem like very daunting and complex equipment, so you might not want to work on by yourself. While it’s true that HVAC equipment can be complicated and needs the attention of a skilled professional more often than most homeowners would like, there are still ways for the DIY-ers out there to work on their HVAC systems before resorting to calling in the pros.

There are some common culprits when it comes to most HVAC problems and malfunctions, so if something goes awry in the operation of your equipment, there are some basic measures you can try to get things back on track.

If any of these work, you have saved the cost of the repair and get the satisfaction of a job well done:

  • Turn all switches – indoors and outdoors – off, then back on again. Do the same thing with the pertinent circuit breakers. Sometimes the system just needs a hard reset to jolt it back to life.
  • Check your thermostat. Is the temperature set where it is supposed to be? If it is too high or too low, the HVAC system will stay on too long or shut itself off too quickly.
  • Make sure your system is in the right mode for the season. It may sound obvious, but for whatever reason, sometimes things wind up in heating mode during cooling season.
  • Check your filters. Clean and/or replace them as necessary. (You do this once a month anyway, right?)
  • Inspect the vents around your home to see if any are blocked, clogged or excessively dirty. Vents that don’t properly circulate the air can cause all kinds of problems within an HVAC system.

This is by no means a comprehensive list of all the things that can go wrong with an HVAC system, but it is at least the usual suspects for the most simple and common problems that many Pittsburgh homeowners encounter. After trying these out, if you are still experiencing difficulties, then it is probably time to call Boehmer Heating & Cooling to have a look at the problem.

Continue Reading

Tags: , , , ,
Posted in Heating | Comments Off on Things to Try Before Calling a Pittsburgh HVAC Professional