Boehmer Heating & Cooling Blog: Posts Tagged ‘Pittsburgh’

Is Your Furnace Making too Much Noise? (and Happy Halloween Weekend!)

Friday, October 28th, 2011

Happy Halloween weekend from everyone at Boehmer Heating & Cooling! We hope you have a fantastically spooky time! But don’t be scared of the noises coming from your furnace, here is some information about common causes and solutions.

The old saying that “It is better to be seen than heard” certainly applies to the mechanical equipment in your Pittsburgh home. If you hear a squeaky noise or loud clattering you automatically suspect that something is wrong. And if that noise is coming from your furnace, you better pay attention to it. A noise is an obvious sign of a problem – minor or major – and it could result in mechanical failure that could leave your home cold and uncomfortable – and affect your home’s indoor air quality.

Today’s newer variable-speed furnaces keep a constant airflow through the ventilation system utilizing a low speed fan that consumes small amounts of electricity. Constant airflow brings in fresh air and keeps the room air from becoming stale or stagnant. Because of this constant operation, it is important to ensure the furnace is running at peak efficiency, which also means that it is running quietly.

Here are some common noises, possible reasons, and suggested repairs. As always, if you are in doubt about how to repair your furnace, call a local qualified heating contractor and schedule a service call.

  • Squealing noise – could be a worn out or slipping blower belt. Check for proper tension of the belt or replace the belt if it is worn out or cracked.
  • Squealing noise – could be worn out motor shaft bearings. Lubricate the blower motor at the proper points.
  • Rumbling noise – often caused by a poorly adjusted pilot light when the burners are turned off. Adjust the pilot as necessary.
  • Rumbling noise – often caused by dirty gas burners when the burners are switched on. This problem requires service from a qualified heating technician.
  • Buzzing noise – often caused when a blower motor mounting come loose. Tighten the mounting screws or use shims to fill gaps.
  • Hissing noise – indicates a possible air leak. This problem requires service from a qualified heating technician.
  • Ticking noise – possibly a leaky gas valve. This problem requires service from a qualified heating technician.
  • Rattling noise – could be a dirty fan blade. Wipe the fan blade or clean with degreaser.
  • Rattling, grinding, or whining – could be resistance to airflow that causes the motor to work harder. Check the vents in each room for dirt, debris, or obstructions and clear them.
  • Vibrating noise – may not be the furnace but loose or cracked seams in the ventilation system. Check the ductwork seams and hangers to ensure everything is tight. You may need duct tape or bracket hardware.

The best way to keep your furnace and ventilation system from making noises is to practice preventative maintenance. Have your furnace checked annually by a qualified heating contractor – and enjoy the peace and quiet.

Continue Reading

How Can You Improve Your Home’s Air Quality? A Tip from Pittsburgh

Wednesday, October 12th, 2011

One of the easiest ways to protect the health of your family is by maintaining high air quality in your Pittsburgh home. Without good air quality, you run the risk of contracting Sick Building Syndrome or making other problems like allergies or asthma worse. Depending on what type of air quality system you already have in place, there are many things you can do to improve your air quality.

Filter Changes

The easiest way to improve air quality is to maintain the equipment you already have. Specifically, change your filters regularly. Filters each have a specified period of time for which they will last. However, if your home has high levels of larger contaminants like pollen and dander, you may need to change your filter more often.

Beyond filter changes, make sure your filtration device uses high quality HEPA filters, capable of stopping debris as small as 0.3 microns.

New Equipment

Finally, you can buy new equipment that does a better job of removing contaminants from your indoor air. If you have only a simple air filter, consider getting a purifier as well to remove other contaminants like smoke and gas. If you have a smaller piece of equipment that works well but longer keeps up with the entire house, there are larger purifiers on the market that can handle a bigger space. Additionally, proper ventilation can help with your indoor air quality if you don’t currently have enough fresh air circulating through your home.

No matter what your problem, there is a solution you can work toward to keep the indoor air quality of your home high.

Continue Reading

How to Add Freon to a Central Air Conditioning Unit: A Guide From Braddock

Wednesday, September 7th, 2011

An air conditioner cannot cool your Braddock home without an adequate amount of Freon. So if you’ve noticed a drop off in the cooling power of your central air conditioning system, inadequate Freon levels may be the culprit. But before you try to add more Freon to your unit, there are several things you need to know.

Low Freon Means a Leak

The truth is that your central air conditioning system should never need to be “topped off” with Freon. The coolant in your unit is part of a closed loop system and doesn’t get used up like fuel. Instead it continues to circulate through your compressor, absorbing and releasing heat to keep the air passing through it cool and comfortable.

If the level of Freon inside your air conditioner drops below the proper level, it generally means there’s a leak somewhere in your system and you’ll need a qualified professional to find that leak and make the necessary repairs.

Professional Access and Expertise

Even if you’re inclined to add Freon to your unit, you’ll probably have a hard time getting your hands on it. As an EPA regulated substance, Freon can only be purchased by EPA certified technicians. If you’re able to purchase this type of coolant for your air conditioner, you’ll need to make sure you know what type your unit uses. Most air conditioners these days use either R22 or R-134a. It’s important that you only use the type of Freon that your air conditioner is built for.

Potential for Harm

Freon is regulated so strictly because it is an extremely hazardous substance. It can harm you or your family and it can do a lot of damage if accidentally released into the atmosphere. To top everything off, if you do accidentally release it, you could be subject to some hefty EPA fines.

In extreme cases, you can do irreparable damage to your air conditioning system by trying to add Freon inappropriately or without proper training. For all of these reasons, it’s best to let a certified professional check and, if necessary, top off the Freon levels in your AC system. For the minimal cost of this service, you can avoid risking the health and safety of your family as well as that of your AC system.

Continue Reading

Save Money with Coupons

Wednesday, July 6th, 2011

HVAC and plumbing services are not things that you usually think about using coupons for. After all, you almost never call an HVAC specialist or plumber unless there is an emergency, and that means you probably do not have time to go hunting for a coupon. You are going to go with the person who is able to respond quickly and get the job done fast.

But that does not mean you should have to pay too much for emergency or other HVAC and plumbing services. In fact, if you know where to look, you can find coupons for great deals on anything from annual maintenance to full new system installation. Of course, not all of these deals are that great. But even saving a little on each service will add up over time. Plus, gathering up some coupons ahead of time will make it easier for you to choose a good HVAC service or plumber because you can see which one in your area offers the best deals.

So where do you find these great coupons? Well, a lot of them can actually be tracked down online. A simple search for HVAC or plumbing coupons in your area should turn up quite a few results for services you could use now or in the future. Some of these offer quite substantial savings as well, so even if they are for something you do not need at the moment, take a look at the expiration date. Even if you are not sure you will be able to use the coupon in that space of time, there is certainly no harm in holding onto it just in case.

It is also important to remember that you do not need to stay with the same company that installed your system, for instance, if you can find a coupon for great savings on annual maintenance with someone else. Just about every company in this field is well versed in handling all types of HVAC or plumbing equipment and they can easily take care of a system that another company installed.

Particularly if you are not satisfied with the service that you get from the company you are now using, look around for coupons from someone else. That is a great way to figure out which new company is worth a try.

Continue Reading